MN01 and MN01W share a 105W, three-stage filter configuration. MN01W adds an outdoor exhaust option. MN02 uses a 200W motor, four filter layers and a wheeled base. Select the configuration around the material, working pattern and connections.
| Feature | MN01 | MN01W | MN02 |
|---|---|---|---|
| Rated power | 105W | 105W | 200W |
| Manufacturer-stated airflow | 155 CFM | 155 CFM | 177 CFM / 300 m³/h |
| Filter layers | Three | Three | Four |
| First layer | Pre-filter cotton | Pre-filter cotton | Washable black foam |
| Connection feature | Flexible capture arm | Capture arm plus optional outdoor exhaust hose | Confirm hose connection for your machine |
| Filter compatibility | Shared with MN01W | Shared with MN01 | Order MN02 components |
Which model should I review first?
For PCB soldering, electronics repair or local nail-dust capture at an individual workstation, review MN01. If you also need an outdoor exhaust route or are considering a small laser setup, such as a 5W unit, review MN01W. For the 200W, four-layer configuration, review MN02 against your laser or workshop requirements.
How should airflow figures be compared?
These are manufacturer-stated figures. Actual capture depends on the airflow setting, filter loading and hose arrangement. Motor wattage does not define the compatible laser wattage, and a hose that fits is not proof of application suitability.
What information should I send before ordering?
Send the machine model, material, process, daily running time, workstation or enclosure photo, connection measurements and destination voltage. Ask the factory to confirm the supplied accessories, consumables, warranty and customization terms in the quotation.